Various

a. The external cleaning of the master cylinder and calipers must be carried out with noncorrosive agents and anyway not with solvents, gasoline or similar, since these products could damage rubber components (seals and dust boots).

b. During warehousing protect the inlet and outlet holes of the master cylinder and of the calipers with the appropriate caps.

c. Half-caliper union bolts cannot be re-screwed, or carry out modifications to the calipers. d. Replacement of components with non-BREMBO parts is not permitted.

e. BREMBO recommends the overhauling of its products through its own authorized personnel; therefore BREMBO doesn’t take the responsibility for overhauling carried out by someone else.