- New
Caliper Piston Ø 38 mm to fit Brembo Calipers (Fixed Caliper) – Replacement Piston | 94.4225.06
- Part Number: 94.4225.06
- Piston Diameter: Ø 38 mm (D1)
- Fits: Brembo fixed calipers with 2, 4, 6, or 8 pistons
- Material: Hard-anodized aluminum
- Manufacturing: Made in Germany – TÜV-certified manufacturer
- Variants: Type 1, 2, 3, or 4
👉 When ordering: Please state your required design (Type 1, 2, 3, or 4) or dimensions in the order comment box!
Caliper Piston Ø 38 mm to fit Brembo Calipers (Fixed Caliper) – Part No. 94.4225.06
Looking for a new piston for your Brembo caliper? This replacement piston Ø 38 mm (part no. 94.4225.06) is made specifically for Brembo fixed calipers with 2, 4, 6, or 8 pistons and fits the piston bore exactly. It is produced in Germany by a TÜV-certified manufacturer from high-strength, hard-anodized aluminum.
These replacement pistons for Brembo calipers are ideal for Brembo caliper piston replacement and for rebuilding a Brembo 4- or 6-piston caliper – for example in case of scoring, corrosion, a stuck piston, or leaks (pressure loss). Available in four designs (Type 1–4).
Technical Specifications – Piston Ø 38 mm for Brembo Calipers
| Part Number: | 94.4225.06 |
| Product Type: | Brake piston / caliper piston / replacement piston (single unit) |
| Piston Diameter (D1): | Ø 38 mm |
| Fits: | Brembo fixed calipers with 2, 4, 6, or 8 pistons |
| Designs: | Type 1, Type 2, Type 3, Type 4 (identical price per piece) |
| Sealing Systems: | Depending on the variant, suitable for repair kits with internal scraper rings or seal kits with external dust boots |
| Material: | High-strength aluminum with a thermally stable, low-friction hard-anodized protective coating |
| Manufacturing: | Made in Germany – TÜV-certified manufacturer |
| Matching Seal Kit: | Brembo seal kit Ø 38 mm – 105.5955.57 |
| Matching Dust Boot: | Brembo dust boot Ø 38 mm – 20.4872.45 |
| Scope of Delivery: | 1x Brake caliper piston (without seal kit) |
Piston Ø 38 mm Designs (Type 1–4)
Brake pistons with the same nominal diameter (Ø 38 mm) come in four designs depending on caliper type, installation position, and sealing system:
- Type 1: Cylindrical piston for calipers with internal scraper ring (overall height H1 = 32.0 mm).
- Type 2: Cylindrical piston with stepped top / recess for calipers with scraper ring (overall height H1 = 34.0 mm).
- Type 3: Piston with stepped flat top and groove for mounting a dust boot.
- Type 4: Piston with stepped chamfered top (with bevel) and groove for dust boot. (Direct, fully compatible replacement for previous ceramic piston versions as well.)
How to Identify the Right Type: Check the Dimensions
Compare the dimensions of the piston removed from your caliper with the technical diagram in the product images:
- D1: Outer piston diameter (nominal dimension)
- H1: Overall piston height
- h2: Base depth / height up to the inner recess
- d2: Top diameter at the dust boot seat (for Type 3 and Type 4)
Pistons for Brembo Calipers – Vehicle Manufacturers
Brembo fixed calipers are fitted as original equipment by many manufacturers or installed as an upgrade brake system. If your vehicle has a Brembo fixed caliper with Ø 38 mm pistons, this replacement piston fits – including vehicles from:
- Abarth
- Acura
- Alfa Romeo
- Alpine
- Aston Martin
- Audi
- Bentley
- BMW
- Bugatti
- BYD
- Cadillac
- Chevrolet (Corvette)
- Chrysler
- Cupra
- Dodge
- Ferrari
- Ford
- Genesis
- Honda
- Hyundai
- Infiniti
- Jaguar
- Jeep
- Kia
- Lamborghini
- Land Rover
- Lexus
- Lotus
- Maserati
- McLaren
- Mercedes-Benz / Mercedes-AMG / Maybach
- Mitsubishi
- Nio
- Nissan
- Pagani
- Polestar
- Porsche
- Subaru
- Tesla
- Toyota (GR)
- Volkswagen
- Volvo
- Xiaomi
- XPeng
- Zeekr
What matters is not the vehicle model but the piston diameter and design in your caliper. Measure your old piston or send us your vehicle and caliper type – we are happy to check for you.
FAQ – Piston Ø 38 mm for Brembo Calipers
Does this piston fit my Brembo caliper?
Yes, if the diameter and design match. The piston is made specifically for Brembo fixed calipers with 2, 4, 6, or 8 pistons. Measure the diameter D1 of your old piston and compare H1, h2, and d2 with the diagram.
Does it fit my car?
Yes, if your vehicle has a Brembo fixed caliper with Ø 38 mm pistons – whether Porsche, BMW, Audi, Mercedes-AMG or another brand. Piston diameter and design are what count.
Is a seal kit included?
No. You receive 1 single brake piston. For Ø 38 mm, the Brembo seal kit 105.5955.57 and the Brembo dust boot 20.4872.45 fit. All sizes are listed in our dust seal & dust cover size overview.
Should I replace the seals when replacing the piston?
Yes. Whenever you replace a caliper piston, the piston seal and dust boot should always be replaced as well (piston and seal kit).
Which type do I need?
Type 1 and Type 2 are for calipers with an internal scraper ring, Type 3 and Type 4 for calipers with an external dust boot.
Where is the piston made?
In Germany, by a TÜV-certified manufacturer.
Does it also replace a ceramic piston?
Yes. Type 4 is a direct, fully compatible replacement for previous ceramic piston versions.
Pistons to fit Brembo Calipers – All Sizes
Need a different diameter? Find all piston sizes directly in our shop – or in our brake piston size overview:
| Piston | Part Number | Shop Link |
|---|---|---|
| Piston Ø 28 mm | 94.4225.01 | View product » |
| Piston Ø 30 mm | 94.4225.02 | View product » |
| Piston Ø 32 mm | 94.4225.03 | View product » |
| Piston Ø 34 mm | 94.4225.04 | View product » |
| Piston Ø 36 mm | 94.4225.05 | View product » |
| Piston Ø 38 mm | 94.4225.06 | (Current product) |
| Piston Ø 40 mm | 94.4225.07 | View product » |
| Piston Ø 42 mm | 94.4225.08 | View product » |
| Piston Ø 44 mm | 94.4225.09 | View product » |
Order Process
Add the desired quantity to your cart and specify the variant you need in the order comments during checkout (Type 1, Type 2, Type 3, or Type 4), or state your measured dimensions (H1, h2, d2).
Questions about measurements or the right type for your caliper?
Our team at ATG-Racing will be happy to help – use our contact form, give us a call, or send us an email directly.
✍️ Go to contact form 📞 Call us: +49 251 16245580 ✉️ info@racing-professionals.comSpecific References
- MPN
- 94422506