Brembo Racing SCF SEAL CONDITIONING FLUID (250ML) 04816490
SCF SEAL CONDITIONING FLUID (250ML)
Art. Nr. 04816490
The genuine Brembo dust boot 20.4872.47 (part number 20487247, also written 20 4872 47) fits all Brembo calipers with Ø 42 mm pistons: fixed calipers with 2, 4, 6 or 8 pistons, whether fitted as original equipment or retrofitted as a Brembo GT or Racing brake system. Alternative numbers: 105.5955.47 / 105.7224.47. It is also known as a caliper dust seal, dust cover or caliper piston boot.
The boot sits between the piston and the caliper body and keeps dust, water, dirt and brake dust away from the piston, the piston bore and the piston seal. If the brake caliper dust seal is cracked, porous or out of place, dirt reaches the piston. This leads to corrosion, scoring and, in the worst case, a stuck piston. The boot is made of heat-resistant, abrasion-resistant rubber and is suitable for road and track use.
| Part Number: | 20.4872.47 |
| Part Number without dots: | 20487247 |
| Alternative Numbers: | 105.5955.47, 105.7224.47 |
| Manufacturer: | Brembo (genuine part) |
| Product Type: | Caliper dust boot / dust seal for brake pistons (single unit) |
| Piston Diameter: | Ø 42 mm |
| Fits: | All Brembo calipers with Ø 42 mm pistons (2, 4, 6 or 8 pistons; OE, GT and Racing) |
| Material: | Heat-resistant, abrasion-resistant rubber |
| Matching Seal Kit: | Brembo seal kit Ø 42 mm – 105.5955.59 (formerly 105.5955.19) |
| Matching Caliper Piston: | Piston Ø 42 mm to fit Brembo – 94.4225.08 (Type 3 or 4, with dust boot groove) |
| Scope of Delivery: | 1x dust boot |
The dust boot is replaced together with the piston seal when rebuilding a caliper. The steps in brief:
Work on the brake system should only be carried out by a workshop or suitably qualified persons.
You need one boot per piston: 4 for a 4-piston caliper, 6 for a 6-piston caliper. Many Brembo calipers have pistons in two sizes (for example 30 mm and 34 mm). Measure each piston and order the matching boot for each size.
Brembo calipers are fitted as original equipment by many manufacturers or installed as an upgrade brake system. If your caliper has Ø 42 mm pistons, this dust boot fits – including vehicles from:
What matters is not the vehicle model but the piston diameter in your caliper. Measure the piston or send us your vehicle and caliper type – we are happy to check for you.
The piston diameter decides. Dust boot 20.4872.47 fits all Brembo calipers with Ø 42 mm pistons, regardless of the vehicle manufacturer. All other sizes are listed in the table below.
Yes. 20.4872.47 is the current Brembo number; 105.5955.47 and 105.7224.47 are alternative numbers for the same Ø 42 mm dust boot. Diameter and fit are the same.
For Ø 42 mm, the Brembo seal kit 105.5955.59 (formerly 105.5955.19) fits.
Yes. Dust boot and piston seal age together and are always replaced together when rebuilding a caliper.
Typical signs are cracks, porous or swollen rubber, a boot that has slipped out of place, and rust or dirt on the piston.
Yes. Dust boot 20.4872.47 is a genuine Brembo part.
Need a different size? Find all dust boots with the matching seal kit and piston directly in our shop. More details in our dust seal & dust cover size overview and the brake piston size overview:
| Piston Ø | Dust boot | Seal kit | Caliper piston |
|---|---|---|---|
| 24 mm | 20.4872.38 | 105.5955.50 | on request |
| 26 mm | 20.4872.39 | 105.5955.51 | on request |
| 28 mm | 20.4872.40 | 105.5955.52 | 94.4225.01 |
| 30 mm | 20.4872.41 | 105.5955.53 | 94.4225.02 |
| 32 mm | 20.4872.42 | 105.5955.54 | 94.4225.03 |
| 34 mm | 20.4872.43 | 105.5955.55 | 94.4225.04 |
| 36 mm | 20.4872.44 | 105.5955.56 | 94.4225.05 |
| 38 mm | 20.4872.45 | 105.5955.57 | 94.4225.06 |
| 40 mm | 20.4872.46 | 105.5955.58 | 94.4225.07 |
| 42 mm | 20.4872.47 (Current product) | 105.5955.59 | 94.4225.08 |
| 44 mm | 20.4872.48 | 105.5955.60 | 94.4225.09 |
| 46 mm | 20.4872.51 | 105.5955.62 | on request |
Questions about the right dust boot or seal for your caliper?
Our team at ATG-Racing will be happy to help – use our contact form, give us a call, or send us an email directly.
✍️ Go to contact form 📞 Call us: +49 251 16245580 ✉️ info@racing-professionals.com