View all products of Brembo Racing

Brembo Caliper Seal Kit Ø 36 mm (8 pcs) | 105595556 / 105.5955.56

  • Part Number: 105.5955.56 / 105595556
  • Alternative Number: 105.5955.16, 105.7224.44 (former number)
  • Piston Diameter: Ø 36 mm
  • Contents: 8 piston seals Ø 36 mm
  • Fits: all Brembo calipers with Ø 36 mm pistons
  • Matching Dust Boot: 20.4872.44
  • Matching Piston: 94.4225.05
  • Also available as single seal: 105595556S
  • Manufacturer: Brembo (genuine part)
📦 Note: Kit with 8 seals. One seal is needed per piston – the kit covers, for example, two 4-piston calipers on one axle if all pistons are Ø 36 mm.
14
105595556
€69.00
Tax included

Brembo Caliper Seal Kit Ø 36 mm – 8 Piston Seals, Part No. 105.5955.56

The genuine Brembo seal kit 105.5955.56 (part number 105595556, also written 105 5955 56) contains 8 piston seals for Ø 36 mm brake pistons. It fits all Brembo calipers with Ø 36 mm pistons: fixed calipers with 2, 4, 6 or 8 pistons, whether fitted as original equipment or retrofitted as a Brembo GT or Racing brake system. Former number: 105.5955.16, 105.7224.44. It is also known as a caliper rebuild kit, caliper repair kit, Brembo racing seal kit or caliper piston seal.

The piston seal sits in the groove of the piston bore in the caliper body. It seals the piston against the brake fluid and pulls it back slightly after braking so the pads do not drag. Over time, heat and age harden the seal. This leads to brake fluid leaks, dragging pads, uneven pad wear or a stuck piston. On cars used on track in particular, the seals should be replaced regularly.

Technical Specifications – Brembo Seal Kit Ø 36 mm

Part Number: 105.5955.56
Part Number without dots: 105595556
Former / Alternative Number: 105.5955.16, 105.7224.44
Manufacturer: Brembo (genuine part)
Product Type: Seal kit / piston seals for brake calipers
Piston Diameter: Ø 36 mm
Contents: 8x piston seal Ø 36 mm
Fits: All Brembo calipers with Ø 36 mm pistons (2, 4, 6 or 8 pistons; OE, GT and Racing)
Matching Dust Boot: Brembo dust boot Ø 36 mm – 20.4872.44 (1 per piston, sold separately)
Matching Caliper Piston: Replacement piston Ø 36 mm to fit Brembo – 94.4225.05
Also available as single seal: Brembo piston seal Ø 36 mm single – 105595556S
Scope of Delivery: 8x piston seal Ø 36 mm
🔧 Replace seal and dust boot together: When you replace the piston seal, always replace the dust boot as well. For Ø 36 mm, the Brembo dust boot 20.4872.44 fits (1 per piston). The matching replacement piston Ø 36 mm (94.4225.05) is also available from us. For seal installation we recommend Brembo SCF Seal Conditioning Fluid. All sizes can be found in our dust seal & dust cover size overview »

Rebuilding a Brembo Caliper: Replacing Pistons, Seals and Dust Boots

When rebuilding a Brembo caliper, the piston seal and dust boot are always replaced together, and the piston as well if it shows scoring or corrosion. The steps in brief:

  • Remove the piston from the caliper, then remove the old dust boot and piston seal.
  • Clean the piston bore, grooves and piston, and check them for scoring or corrosion. Replace damaged pistons (94.4225.05).
  • Wet the new piston seal (105595556) with Brembo SCF or brake fluid and fit it into the groove.
  • Fit the new dust boot (20.4872.44) and insert the piston.
  • Bleed the brake system and check that it works properly.

Work on the brake system should only be carried out by a workshop or suitably qualified persons.

How Many Seals Do I Need?

You need one seal per piston. The 8-piece kit covers two 4-piston calipers (one axle) or one 8-piston caliper – provided all pistons are Ø 36 mm. Many Brembo calipers have pistons in two sizes (for example 30 mm and 34 mm). Measure each piston and order the matching seal for each size. If you only need a few seals, the Ø 36 mm seal is also available individually: Brembo piston seal Ø 36 mm single – 105595556S.

Brembo Seals – Vehicle Manufacturers

Brembo calipers are fitted as original equipment by many manufacturers or installed as an upgrade brake system. If your caliper has Ø 36 mm pistons, this seal kit fits – including vehicles from:

  • Abarth
  • Acura
  • Alfa Romeo
  • Alpine
  • Aston Martin
  • Audi
  • Bentley
  • BMW
  • Bugatti
  • BYD
  • Cadillac
  • Chevrolet (Corvette)
  • Chrysler
  • Cupra
  • Dodge
  • Ferrari
  • Ford
  • Genesis
  • Honda
  • Hyundai
  • Infiniti
  • Jaguar
  • Jeep
  • Kia
  • Lamborghini
  • Land Rover
  • Lexus
  • Lotus
  • Maserati
  • McLaren
  • Mercedes-Benz / Mercedes-AMG / Maybach
  • Mitsubishi
  • Nio
  • Nissan
  • Pagani
  • Polestar
  • Porsche
  • Subaru
  • Tesla
  • Toyota (GR)
  • Volkswagen
  • Volvo
  • Xiaomi
  • XPeng
  • Zeekr

What matters is not the vehicle model but the piston diameter in your caliper. Measure the piston or send us your vehicle and caliper type – we are happy to check for you.

FAQ – Brembo Seal Kit Ø 36 mm

Which seal fits my Brembo caliper?

The piston diameter decides. Seal kit 105.5955.56 fits all Brembo calipers with Ø 36 mm pistons, regardless of the vehicle manufacturer. All other sizes are listed in the table below.

How many seals are in the kit?

Seal kit 105.5955.56 contains 8 piston seals Ø 36 mm. Single seals are available under part number Brembo piston seal Ø 36 mm single – 105595556S.

Is 105.5955.56 the same part as 105.5955.16?

Yes. 105.5955.56 is the current Brembo number; 105.5955.16 is the former number for the same Ø 36 mm seal kit.

Which dust boot matches?

For Ø 36 mm, the Brembo dust boot 20.4872.44 fits (formerly 105.5955.44). You need one dust boot per piston.

Which caliper piston matches?

For Ø 36 mm, the replacement piston 94.4225.05 to fit Brembo fixed calipers matches.

How do I know the piston seal needs replacing?

Typical signs are brake fluid on the caliper, dragging pads, unevenly worn pads, or a piston that is hard or impossible to push back.

Is this a genuine Brembo part?

Yes. Seal kit 105.5955.56 is a genuine Brembo part.

Brembo Seals, Dust Boots and Pistons – All Sizes

Need a different size? Find all seal kits, single seals, dust boots and pistons directly in our shop. More details in our dust seal & dust cover size overview and the brake piston size overview:

Piston Ø Seal kit (8 pcs) Single seal Dust boot Caliper piston
24 mm 105.5955.50 105.5955.50S 20.4872.38 on request
26 mm 105.5955.51 105.5955.51S 20.4872.39 on request
28 mm 105.5955.52 105.5955.52S 20.4872.40 94.4225.01
30 mm 105.5955.53 105.5955.53S 20.4872.41 94.4225.02
32 mm 105.5955.54 105.5955.54S 20.4872.42 94.4225.03
34 mm 105.5955.55 105.5955.55S 20.4872.43 94.4225.04
36 mm 105.5955.56 (Current product) 105.5955.56S 20.4872.44 94.4225.05
38 mm 105.5955.57 105.5955.57S 20.4872.45 94.4225.06
40 mm 105.5955.58 105.5955.58S 20.4872.46 94.4225.07
42 mm 105.5955.59 105.5955.59S 20.4872.47 94.4225.08
44 mm 105.5955.60 105.5955.60S 20.4872.48 94.4225.09
46 mm 105.5955.62 105.5955.62S 20.4872.51 on request

Questions about the right seal or dust boot for your caliper?

Our team at ATG-Racing will be happy to help – use our contact form, give us a call, or send us an email directly.

✍️ Go to contact form 📞 Call us: +49 251 16245580 ✉️ info@racing-professionals.com

Specific References

MPN
105.5955.56

Product Comments

Shopping Cart

Cart is empty.

Account

Account

No account?
Create an Account