Brembo Racing SCF SEAL CONDITIONING FLUID (250ML) 04816490
SCF SEAL CONDITIONING FLUID (250ML)
Art. Nr. 04816490
The genuine Brembo seal kit 105.5955.58 (part number 105595558, also written 105 5955 58) contains 8 piston seals for Ø 40 mm brake pistons. It fits all Brembo calipers with Ø 40 mm pistons: fixed calipers with 2, 4, 6 or 8 pistons, whether fitted as original equipment or retrofitted as a Brembo GT or Racing brake system. Former number: 105.5955.18, 105.7224.46. It is also known as a caliper rebuild kit, caliper repair kit, Brembo racing seal kit or caliper piston seal.
The piston seal sits in the groove of the piston bore in the caliper body. It seals the piston against the brake fluid and pulls it back slightly after braking so the pads do not drag. Over time, heat and age harden the seal. This leads to brake fluid leaks, dragging pads, uneven pad wear or a stuck piston. On cars used on track in particular, the seals should be replaced regularly.
| Part Number: | 105.5955.58 |
| Part Number without dots: | 105595558 |
| Former / Alternative Number: | 105.5955.18, 105.7224.46 |
| Manufacturer: | Brembo (genuine part) |
| Product Type: | Seal kit / piston seals for brake calipers |
| Piston Diameter: | Ø 40 mm |
| Contents: | 8x piston seal Ø 40 mm |
| Fits: | All Brembo calipers with Ø 40 mm pistons (2, 4, 6 or 8 pistons; OE, GT and Racing) |
| Matching Dust Boot: | Brembo dust boot Ø 40 mm – 20.4872.46 (1 per piston, sold separately) |
| Matching Caliper Piston: | Replacement piston Ø 40 mm to fit Brembo – 94.4225.07 |
| Also available as single seal: | Brembo piston seal Ø 40 mm single – 105595558S |
| Scope of Delivery: | 8x piston seal Ø 40 mm |
When rebuilding a Brembo caliper, the piston seal and dust boot are always replaced together, and the piston as well if it shows scoring or corrosion. The steps in brief:
Work on the brake system should only be carried out by a workshop or suitably qualified persons.
You need one seal per piston. The 8-piece kit covers two 4-piston calipers (one axle) or one 8-piston caliper – provided all pistons are Ø 40 mm. Many Brembo calipers have pistons in two sizes (for example 30 mm and 34 mm). Measure each piston and order the matching seal for each size. If you only need a few seals, the Ø 40 mm seal is also available individually: Brembo piston seal Ø 40 mm single – 105595558S.
Brembo calipers are fitted as original equipment by many manufacturers or installed as an upgrade brake system. If your caliper has Ø 40 mm pistons, this seal kit fits – including vehicles from:
What matters is not the vehicle model but the piston diameter in your caliper. Measure the piston or send us your vehicle and caliper type – we are happy to check for you.
The piston diameter decides. Seal kit 105.5955.58 fits all Brembo calipers with Ø 40 mm pistons, regardless of the vehicle manufacturer. All other sizes are listed in the table below.
Seal kit 105.5955.58 contains 8 piston seals Ø 40 mm. Single seals are available under part number Brembo piston seal Ø 40 mm single – 105595558S.
Yes. 105.5955.58 is the current Brembo number; 105.5955.18 is the former number for the same Ø 40 mm seal kit.
For Ø 40 mm, the Brembo dust boot 20.4872.46 fits (formerly 105.5955.46). You need one dust boot per piston.
For Ø 40 mm, the replacement piston 94.4225.07 to fit Brembo fixed calipers matches.
Typical signs are brake fluid on the caliper, dragging pads, unevenly worn pads, or a piston that is hard or impossible to push back.
Yes. Seal kit 105.5955.58 is a genuine Brembo part.
Need a different size? Find all seal kits, single seals, dust boots and pistons directly in our shop. More details in our dust seal & dust cover size overview and the brake piston size overview:
| Piston Ø | Seal kit (8 pcs) | Single seal | Dust boot | Caliper piston |
|---|---|---|---|---|
| 24 mm | 105.5955.50 | 105.5955.50S | 20.4872.38 | on request |
| 26 mm | 105.5955.51 | 105.5955.51S | 20.4872.39 | on request |
| 28 mm | 105.5955.52 | 105.5955.52S | 20.4872.40 | 94.4225.01 |
| 30 mm | 105.5955.53 | 105.5955.53S | 20.4872.41 | 94.4225.02 |
| 32 mm | 105.5955.54 | 105.5955.54S | 20.4872.42 | 94.4225.03 |
| 34 mm | 105.5955.55 | 105.5955.55S | 20.4872.43 | 94.4225.04 |
| 36 mm | 105.5955.56 | 105.5955.56S | 20.4872.44 | 94.4225.05 |
| 38 mm | 105.5955.57 | 105.5955.57S | 20.4872.45 | 94.4225.06 |
| 40 mm | 105.5955.58 (Current product) | 105.5955.58S | 20.4872.46 | 94.4225.07 |
| 42 mm | 105.5955.59 | 105.5955.59S | 20.4872.47 | 94.4225.08 |
| 44 mm | 105.5955.60 | 105.5955.60S | 20.4872.48 | 94.4225.09 |
| 46 mm | 105.5955.62 | 105.5955.62S | 20.4872.51 | on request |
Questions about the right seal or dust boot for your caliper?
Our team at ATG-Racing will be happy to help – use our contact form, give us a call, or send us an email directly.
✍️ Go to contact form 📞 Call us: +49 251 16245580 ✉️ info@racing-professionals.com